1. Install roller shutter accessories:

Determine the left-right direction of the head and the vertical direction of the bead. The left and right of the head can be interchanged. The head can be installed according to the owner's preferences or the convenience of the home. The bead-making head can be rotated to correspond to the side-lifting and top-loading use.

2. Installation of head:

There are two methods of head installation, which correspond to two installation schemes.

(1) Exterior: Compare the roller blind curtain with the window, and find the proper position, mark the position of the head screw on the window frame or wall, and use the screws to tighten the left and right head on the window frame or wall, and there will be no pull The rotatable module on the bead head is opened.

(2) Interior decoration: place the roller blind curtain in the window frame, and after finding a suitable position, mark the position of the head screw on the top of the window frame, and use the screws to lock the left and right heads on the top of the window frame, respectively. The rotatable module on the head of the bead is lifted.

3. Installation track

(1) First put the right end of the upper rail into the head with beads, and then put the left end of the upper rail into the head without beads.

(2) Buckle up the rotatable module to confirm that the roller shutter will not fall or move easily, then the installation is completed.

(3) Pull down the bead curtain on the front side lightly, and the roller shutter will automatically rise.

(4) Pull down the bead curtain on the back side to control the descent of the roller blind.

Note: To close, the roller blind must be turned perpendicular to the wall, and then pulled up; if you want to stop halfway or finally, pull the rope 45 degrees to the right, and the entire curtain will be fastened automatically.